Rubber Transmission Belts

Beltech Rubber Transmission Belts comprise of several plies of cotton canvass with thin rubber coating and are suitable for power transmission or indoor transport of semi-finished products whether on roller or sheet metal. These are also used as bucket lifts for raising small material such as gift, screws, paste etc.

When used as belts in oil resistant versions they are suitable for transporting sheet metal, metal parts, skin & for sorting benchers. It is also used in Agriculture sector for irrigation of fields.

Specification

Belt Width	25 mm to 1200 mm
Belt ply	2 ply to 12 Ply
Belt Thickness:
Plies	Thickness	Range MM
3	3.6	4.4
4	4.6	5.6
5	5.8	7.0
6	7.0	8.4

Belt Construction
Square Edge
Round Edge

Belt Colours
Beige, Red	Camel, Grey,	Green or as required

Tensile Strength of Fabric
Finished Belting per mm Width Wrap
28 ozs.	32 ozs	34 ozs.
3.00 Kg.	5.00 Kg	6.00 Kg.

Average Wrap Elongation
Fabric of Finished belting under a load of 1.8 Kg./mm width per ply.

Ply Adhesion
Per 25 mm width
28 Ozs	32 Ozs.	34 Ozs.
8 Kg.	7 Kg.	7 Kg.

Rubber Transmission Belts

Normal Belt width	Tolerance Belt Width
25 - 63 mm	2.0 mm
75 - 125 mm	3.0
140 - 250	4.0
280 - 500	5.0
500 - 900	7.0
900 - 1200	9.0
Tolerance on ordered length 10% of Belt

RATINGS
Maximum ratings in KV per cm. Width of Belting at 180º arc of contact
Type of Fabric	Weight of Fabric g/m2	Pulley Diameters	Belt Speed m/s	Rating per cm Width per ply
28	810	250mm	5	0.12kw
32	915	250mm	5	0.15kw
34	910	250mm	5	0.12kw

MINIMUM PULLEY DIAMETERS
Belt speed & Belt plies in mm Maximum Belt Speed ( Meters per second)
No of plies	10	15	20	25	30
3	90	10	112	140	180
4	140	160	180	200	250
5	200	224	250	315	355
6	250	315	355	400	450

INQUIRY FORM
Contact Information * fields are mandatory
Your Name *
Company Name
Address *
Country *
Email ID *
Phone Number *
Fax
Inquiry Details
Inquiry For
Details *

Rubber Transmission Belts

Specification

Rubber Transmission Belts

INQUIRY FORM